Linseed Oil Putty Natural
Hand-applied linseed oil putty. Tested to BS 544 and BS 8000 Part 7.
Reference: Weight: 0.50 kg
Heritage Putty is an elastic, paintable hybrid polymer-based cartridge applied putty for the installation of single glass, insulating glass units and reduced sightline / slim units into softwood, hardwood, steel and stone frames.
Heritage Putty is an elastic, paintable hybrid polymer-based cartridge applied putty for the installation of single glass, insulating glass units and reduced sightline / slim units into softwood, hardwood, steel and stone frames.
APPLICATIONS
Suitable for glazing where the appearance of a traditional putty front is required, such as for the restoration and replacement of glazing in period properties, listed buildings and conservation areas.
FEATURES AND BENEFITS
PROPERTIES
Application temperature range: +5°C to +30°C
Priming: Surfaces should be primed accordingly, depending upon frame / substrate type.
Shelf life: 12 months when stored in cool, dry conditions.
Skinning time: 20 minutes Working time: 10 minutes.
INSTRUCTIONS
Surface preparation: All surfaces must be clean, dry and free from frost, grease and loose materials. Apply primer if required. In situations where an especially neat finish is required, use masking tape to cover the face edges of the joint and remove immediately once tooling has been completed Cut the top of the screw thread off the cartridge and screw on the nozzle. Cut nozzle to correct diameter for joint size. Apply using a skeleton or powered gun into the joint ensuring good contact with surfaces.
Tooling: Tool immediately after sealant has been applied within the working time for the product. Cleaning: Excess uncured material can be removed mechanically and surfaces cleaned with white spirit.