Hodgson Silfix U9 310ml - available in 5 colors
Silfix U9 is widely regarded as one of the best low modulus silicone sealants available. Conforming fully to the requirements of BS 5889 Type A and ISO11600 classification G-25-LM, it offers outstanding performance across a wide variety of glazing, industrial and construction applications. It has excellent adhesion to glass, timber, metals, brickwork, plastics and concrete and does not normally require a primer.
Premium quality, low modulus, neutral cure silicone sealant. Excellent adhesion to glass, timber, metals, brickwork, plastic and concrete. Conforms to ISO 11600 G-25 LM. Tested to EN 15651-1:F-EXT-INT-CC, EN 15651-2:G-CC and EN 15651-3 S (Translucent tested to parts 1 and 2 only).
Capping and bedding of glass and insulating glass units in bead glazing systems. For sealing joints between GRP panels and roof sheets, trims and flashing in roofing and cladding, PVCu, aluminium, steel, timber frame and door surrounds, construction, and industrial applications.
- Excellent adhesion to a wide range of materials
- Suitable in many applications
- Excellent tooling
- Suitable for use with laminated glass
- Superior performance across a wide range of temperatures
Application temperature range: +5°C to +40°C
Curing rate: Cures at a rate of 2mm in 24 hours at 23°C @ 60% RH. Lower temperatures and drier conditions will result in a slower rate of cure.
Shelf life: 12 months.
Skinning time: Skin forms after approximately 20 minutes at 23°C @ 55% RH.
Working time: Approximately 15 to 20 minutes depending on conditions.
Joint design: Please consult the Technical Information Sheet entitled ‘Joint design for cartridge based products’ prior to application.
Surface preparation: All surfaces must be clean, dry and free from frost, grease and loose materials. Apply primer if required. In situations where an especially neat finish is required, use masking tape to cover the face edges of the joint and remove immediately once tooling has been completed.
Cut the tip of the screw thread off the cartridge and screw on the nozzle. Cut nozzle to correct diameter for joint size. Apply using a skeleton or powered gun into the joint ensuring good contact with surfaces. In deep joints, the use of Hodgson Backing Rod is essential to ensure good joint formation.
Tooling: Tool immediately after sealant has been applied within the working time for the product
13 other products in the same category:
PREMIUM QUALITY, multi-use, low modulus acetoxy silicone with powerful anti-fungicidal agents. Very fast skinning time and final cure. 100% silicone, with no shrinkage. Thick bodied, with excellent toolability. Primerless adhesion on most traditional sanitary materials – ceramic tiles, porcelain, metals and wood. Resistant to UV, rain, snow, ozone, and many chemicals. High and low temperature resistance.
Silfix® LM is a one part, neutral cure, low modulus, silicone sealant which offers good all round performance and durability in most construction joints. Conforms to EN15651-1: F-EXT-INT-CC, EN15651-2: G-CC. Tested by BSRIA and shown to be effective in meeting the requirements for DW144 Class C High Pressure Ductwork up to 1500Pa.(Report No. 58936/2)
Even a small silicone joint can decide on an attractive bathroom: either by being ugly or by showing traces of mildew or mould after some time. The FUGI Toolkit presents the professional solution for all different kinds of joints. Added to that, this unique toolkit enables you to render perfect joints without the use of soapy water. Consequently the formation or mould is made nearly impossible. Stylish bathtubs, elegant wash basins and quality-tiles have earned a likewise high-class surrounding – provide your customers with this useful tool!
With the Profiling Kit Professional all standard sealants can be processed more easily. Cleverly attached guides help bridging intersections and prevent any subsidence when working these intersections. With this tool even complex and challenging jointing works become a child’s play. Here the unique technique of grouting without a separating agent also takes effect, thus notably minimising the danger of mould forming underneath the joints. Additionally the Profiling Kit Professional allows for simply reworking blemishes without removing the existing joint.
Aquacaulk is a high performance emulsion acrylic sealant based on the latest developments in acrylic elastomer technology. It has been specially formulated for sealing around window frames, skirtings, architraves and general small gap filling. Used extensively by contractors over many years, it offers a degree of flexibility whilst still retaining the ability to be easily overcoated with conventional paints. Although primarily used internally, it has good external performance when applied in suitable conditions.
Silfix HM is a premium quality high modulus, sanitary, acetoxy cure silicone sealant which offers outstanding strength, performance and durability. It is ideal for use in a wide variety of glazing, industrial and domestic applications and is ideal for use in glass/glass joints, shop fronts, kitchens and bathrooms.